Concrete Slab Installation in Conway, AR

Our concrete slab installation in Conway, AR provides solid bases for sheds, additions, workshops, and more. We handle excavation, compaction, vapor barriers, rebar, and proper mix design. Get a flat, durable slab that stays stable and supports your structure for years of use.

Primetime Concrete Conway provides professional concrete slab installation throughout Conway, AR and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (806) 513-3678 or request your free quote.

Concrete slab installation in Conway that holds up to real use

Primetime Concrete Conway installs concrete slabs for homes and small commercial properties in and around Conway, built for our clay-heavy soils and hot, humid summers. We focus on getting the base right first, because most slab problems in Faulkner County start with poor preparation, not the concrete itself.

If you need a slab for a shop, garage, room addition, patio, RV pad, or small warehouse, we start with how you plan to use it. Vehicle traffic, equipment weight, and whether the space will be enclosed or open all affect thickness, reinforcement, and finish type. We walk the site with you, check drainage, soil condition, access for the truck, and nearby structures or fences. From there we give you a clear scope of work and price so there are no surprises later.

Our focus is simple: a slab that stays level, drains correctly, does not crumble at the edges, and does not turn into a spider web of cracks after the first Conway summer.

How we prepare your site and base (where most problems are avoided)

On every concrete slab installation, Primetime Concrete Conway starts with layout and excavation. We string-line or laser-mark the footprint, then cut or scrape the area to the correct depth. For a typical residential slab, this means removing organic topsoil and soft pockets until we reach stable ground. Leaving roots and soft dirt under a slab is the fastest way to end up with settlement and cracks in a year or two.

Conway soils hold water, so we focus heavily on grading and drainage. We shape the subgrade so water moves away from your home or building and, when necessary, add a slight slope to outdoor slabs to prevent standing puddles. On many projects we install a compacted base layer of crushed stone or gravel to improve drainage and reduce frost-related movement in winter.

We compact the base in thin lifts with a plate compactor or roller, not just a quick pass. You should see us testing soft spots by walking and probing the area before forms go in. If we find pumpy, wet, or expansive clay, we may undercut and replace some soil with aggregate, especially for heavier-use slabs like driveways, RV pads, or shop floors.

Forms, reinforcement, and mix design choices that fit your slab

Once the base is stable, we set forms using straight 2x lumber or steel forms, anchored with stakes that are driven tight so the forms do not bow when the concrete is placed. We confirm slab thickness and slab elevation with a laser level. Even a half inch of variation across a large slab can cause drainage and puddling issues, especially for patios and garages.

Reinforcement is tailored to the job. For light-use patios or sidewalks in Conway, we commonly use welded wire mesh and increased control joint planning. For garages, shops, and driveways, we typically recommend rebar on a grid pattern, most often #3 or #4 bar at 18 to 24 inches on center. For heavier trailers, equipment, or small commercial use, we can tighten that spacing and adjust thickness to 5 or 6 inches.

We also select the right concrete mix. For most structural slabs, we use a minimum 3,500 to 4,000 psi mix with appropriate air entrainment to handle our freeze-thaw cycles. In hot months, we may specify retarding admixtures to slow the set so we can finish the surface properly without burning it. For interior or covered slabs, we can use mixes designed for a smoother troweled finish or for later coatings like epoxy.

Placing, finishing, and curing your concrete slab the right way

On pour day, Primetime Concrete Conway coordinates concrete truck timing so the load is placed quickly and evenly. We do not saturate the mix with water at the truck to make it easy to move, because that weakens the slab and increases shrinkage cracking. Instead, we use proper tools, manpower, and, when needed, a concrete pump for tight-access Conway backyards or infill lots.

We strike off the surface with straight screeds, then bull float to embed aggregate and start smoothing. For exterior slabs, we typically apply a light broom finish, which provides traction during rain and winter conditions. For interior or covered slabs that may receive epoxy or tile, we can machine trowel to a denser, smoother surface, as long as it suits the future floor covering.

Curing is where many DIY slabs fail. In the Arkansas heat, surfaces dry too fast and crack if they are not protected. We apply a curing compound and, when conditions are very hot, use additional methods like light misting and coverings to control moisture loss. We will ask you to keep traffic off the slab for a specific period, usually at least 3 to 7 days before light use and longer before parking vehicles or heavy equipment.

Controlling cracks, drainage, and Conway-specific slab issues

Every concrete slab will crack to some degree, but the goal is to control where and how. We place control joints at calculated spacing based on slab thickness and layout. For a typical 4 inch garage or shop slab, we aim for joints that divide the slab into squares or rectangles that are not excessively long and narrow. Joints can be tooled while the concrete is still plastic or saw cut shortly after setting, with timing based on temperature and mix.

Conway gets hard rains and occasional winter freezes, so we plan drainage and surface slope carefully. Driveways and patios are poured with a slight fall away from structures. If your yard already has drainage issues, we may recommend French drains or surface drains alongside the slab so it does not become a dam that traps water against your home.

We also watch for tree roots, existing utilities, and nearby structures. During our site visit, we will talk about trees that might cause root pressure under future slabs and discuss options, such as root barriers or repositioning the slab. For older Conway neighborhoods with shallow utilities or unknown lines, we may recommend calling for locates and, if necessary, adjusting the slab footprint to avoid damage.

Costs, scheduling, and what to expect from Primetime Concrete Conway

The cost of concrete slab installation in Conway varies mainly by slab size, thickness, access, reinforcement type, and how much site prep is needed. Removing old concrete, undercutting poor soil, or trucking in base material adds to the price, but these steps often prevent much more expensive repairs later. We give itemized written estimates so you can see where your money is going, line by line.

Season also affects scheduling. Spring and fall usually offer the best conditions, but we pour concrete year-round, adjusting start times and mix designs for summer heat or colder snaps. In very wet periods, we may recommend waiting a few days for the ground to firm up instead of forcing a pour on mud, which would compromise your slab.

From first call to final walk-through, Primetime Concrete Conway keeps communication straightforward. We confirm dates, explain what work may be noisy or dusty, and let you know when you can walk, drive, or build on the new concrete. If you are planning to place a metal building, carport, or framed addition on the slab, we can coordinate anchor bolt locations and edge details so your builder is not fighting the concrete later.