Concrete Driveway Repair and Replacement in Conway, AR

We provide concrete driveway repair in Conway, AR to restore safety and appearance to cracked or failing driveways. Our team diagnoses issues like settling, spalling, and drainage problems, then recommends patching, resurfacing, or full replacement. Protect your vehicles and boost curb appeal with a smooth, long lasting surface.

Primetime Concrete Conway provides professional concrete driveway repair throughout Conway, AR and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (806) 513-3678 or request your free quote.

Concrete Driveway Repair in Conway, AR

A worn or cracked driveway is more than an eyesore. In Conway it can also cause drainage issues, trip hazards, and vehicle damage. Primetime Concrete Conway focuses on concrete driveway repair that actually solves the underlying problem instead of just hiding it with patch material.

When we inspect a driveway, we look at the overall concrete condition, thickness, base condition, drainage pattern, and where the cracks started. There is a big difference between surface spider cracking that can be resurfaced and deep structural cracks caused by a failing base or tree roots. We explain what is salvageable and what is not, so you are not wasting money on a repair that will not last through another Arkansas summer.

In many Conway neighborhoods, driveways were poured on minimal base material and have been moved by clay soil and seasonal moisture changes. That movement shows up as heaving at the joints, sunken tire tracks, and cracks that keep opening back up. Our crews address the base and drainage first, then repair or replace the concrete so you are not calling another contractor in two years for the same problem.

How We Repair Damaged Concrete Driveways

Most concrete driveway repair projects with Primetime Concrete Conway start with cutting and removing the failed sections instead of coating over them. We use saws to create clean, straight edges that can accept new concrete, which prevents ragged cold joints that tend to crack again.

Once the bad concrete is out, we excavate soft or washed out soil and replace it with compacted base material, such as crushed stone or screened gravel. This step is critical in Conway because our clay soils expand and contract with rain and dry spells. A properly compacted base helps your repaired driveway ride out those changes with less movement.

For trip hazards where only one panel has settled, we may use slab stabilization techniques. This can include drilling small holes and pressure injecting grout beneath the slab to lift and support it. It is not right for every situation, but when the driveway concrete is still structurally sound, this can fix low spots without a full tear out.

Surface defects like scaling from deicing salts, shallow pitting, or light cracking may be addressed with a concrete overlay or patch system. We mechanically clean and profile the surface using grinding equipment, then apply bonding agents and high strength repair mortar or overlay mix. Done correctly, this can extend the life of the driveway, but we only recommend it when we are confident the base and slab are still solid.

Driveway Replacement and New Pour Process

When a driveway is too far gone for effective repair, Primetime Concrete Conway recommends full concrete driveway replacement. This allows us to rebuild the base, fix slope problems, and pour a new slab that meets current standards instead of trying to work around old mistakes.

Our crew starts by breaking and removing all existing driveway concrete and hauling it off site to an approved dump or recycling facility. We then rough grade the area and check slope to the street or designated drainage points, which is important in Conway neighborhoods that already have standing water issues.

We install and compact a new base layer, typically 4 inches or more of crushed stone or similar material depending on soil conditions and expected vehicle loads. For the slab itself, most residential driveways are poured at 4 to 5 inches thick with 3000 to 4000 psi concrete. For heavier trucks, RVs, or boat trailers, we may recommend thicker sections or higher strength mixes.

We place welded wire mesh or rebar where appropriate, set expansion joints at the garage and sidewalk, and cut control joints in a pattern designed to control where cracking occurs naturally. After placing and finishing the concrete, we use proper curing methods, such as curing compound or wet curing, to help the surface reach its intended strength and reduce future cracking and dusting.

Finishes, Options, and Local Considerations

Concrete driveway repair or replacement does not have to be plain gray unless that is what you want. Primetime Concrete Conway offers several finish options that hold up well in Conway weather. A standard broom finish is the most common, provides good traction when wet, and is cost effective. We can also do light decorative touches like border bands, exposed aggregate sections, or simple color additives where HOA rules allow.

If your home is in a Conway subdivision with an HOA, there may be requirements for driveway color, texture, or layout. We encourage homeowners to check their covenants before work starts. Our team can provide drawings or basic descriptions of the planned repair or replacement if you need to submit them for HOA approval.

Within Conway city limits, some driveway approach work near the street may fall under city standards, especially if you are changing the width or altering the curb cut. We can help you understand when a permit or inspection may be needed and factor that into your project schedule. While minor repairs within your existing footprint usually do not trigger permitting, full replacements that alter drainage patterns or tie into sidewalks sometimes do, and it is better to clarify that up front.

What Affects Cost and Timeline for Driveway Work

The cost of concrete driveway repair and replacement in Conway varies based on several real factors, not just square footage. Primetime Concrete Conway looks at access for equipment, how many sections are failing, thickness of the existing slab, and how much base work will be required.

Repairs of isolated cracks or small sunken areas usually cost less than full tear outs, but if most of your driveway has extensive structural cracking, patching becomes false economy. In that case, a single, well planned replacement can be more cost effective over 10 to 20 years than chasing multiple small repairs that never address the foundation.

Tree roots are another cost factor around Conway, especially on older properties with large oaks or maples. If roots are lifting slabs, we may need to coordinate with an arborist or remove specific roots, then design the new driveway layout and joints to minimize future conflict. This adds time and some cost but prevents the same issue from returning.

Weather and curing time also affect your schedule. Concrete generally needs at least 24 hours before light foot traffic and 5 to 7 days before normal passenger vehicle use, depending on mix design and temperature. Heavy vehicles should wait longer. We plan pours around Conway’s typical rain patterns as much as possible, and if conditions are not right on your scheduled day, we will explain the reason for any delay instead of rushing and risking a weak surface.

Why Conway Homeowners Choose Primetime Concrete Conway

There are plenty of contractors who can pour concrete, but not all of them specialize in diagnosing driveway issues that are specific to Conway’s soil and drainage conditions. Primetime Concrete Conway looks at each project as a combination of structure, water control, and long term durability, not just a fast pour.

Before starting work, we walk the driveway with you and point out every concern we see, from hairline cracks near the garage to low spots that collect water after a thunderstorm. We outline at least one option for straightforward repair and, if needed, one for full replacement, along with pros, cons, and realistic life expectancy for each.

We keep the job site as clean as possible, manage concrete washout correctly, and protect adjacent landscaping and structures. After the pour and finishing, we provide clear written instructions on when you can walk and drive on the surface, how to handle sealing, and what to avoid in the first year, such as harsh deicers. Our goal is that you only have to deal with this driveway project once in a long time, and that it performs the way it should in Conway’s climate.