
We provide concrete demolition in Conway, AR to safely remove old slabs, driveways, patios, and walkways.
We provide concrete demolition in Conway, AR to safely remove old slabs, driveways, patios, and walkways. Using the right equipment, our crew breaks, loads, and hauls away debris efficiently. Clear the way for new construction or landscaping with minimal disruption to your property.
Primetime Concrete Conway provides professional concrete demolition throughout Conway, AR and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (806) 513-3678 or request your free quote.

Old cracked concrete can be more than an eyesore. It can trip guests, flood your carport, or keep you from updating your outdoor space. Primetime Concrete Conway focuses on concrete demolition and removal that fits how people actually live and build in Conway, AR.
We handle small and large tear outs, from a single trip-prone step on your front porch to full driveway and patio removals. Before we touch anything, we walk the property with you, talk through how you use the space, and look for issues like drainage paths, tree roots, and nearby structures. That first walkthrough shapes everything that follows so we do not accidentally create new problems when we remove the old concrete.
Conway has a mix of older slabs, heavier commercial pads, and DIY projects from years past. Each behaves differently when you break it apart. We adjust our tools and approach depending on thickness, whether there is rebar or wire mesh, and how close the slab is to your home, fencing, or neighbors. The goal is simple. Remove the concrete you do not want, protect the things you do, and leave your yard in a condition that is ready for whatever comes next.
With Primetime Concrete Conway you are never guessing what will happen next. Here is how a typical concrete demolition job in Conway usually goes:
1. Site visit and estimate. We measure the square footage of concrete, check thickness at exposed edges, locate control joints, and probe for reinforcement. We also note access for equipment, gate widths, overhead lines, and parking so we can choose the right machinery.
2. Utility and hazard check. Before any breaking starts we verify underground utilities. For larger removals like driveways or parking areas we request 811 utility locates if needed and confirm gas, water, and communication lines. Inside garages or close to structures we also look for post-tension cables or embedded utilities.
3. Choosing the breaking method. For open areas with good access we often use a skid steer with a hydraulic breaker to break up slabs into manageable chunks. In tighter backyard spaces or close to foundations, we rely more on handheld electric breakers so we can control vibration and avoid cracking nearby concrete you intend to keep.
4. Breaking and sorting. As we break the slab, we separate concrete from rebar or wire mesh. Steel goes into one pile, clean concrete into another. Keeping materials separated speeds up loading and reduces disposal costs. We also watch for soft subgrade, trapped water, or sinkholes that may have caused the original cracking.
5. Loading and hauling. We use wheelbarrows, skid steers, or small loaders depending on access. All broken concrete is removed from the site. In many cases, we can send it to a recycling facility where it becomes road base or fill, which is better for the environment and can sometimes help with pricing.
6. Final grading and cleanup. Once the old concrete is gone, we scrape and level the subgrade so you have a smoother base for future work. For projects where a new pour is planned, we can discuss compaction and base rock options at the same time. Before we leave, walkways are swept, larger dust piles are removed, and we check that gates and fences are closed like we found them.
Every concrete demolition project is different, and we are transparent about why one job costs more than another. When Primetime Concrete Conway builds an estimate, we look closely at a few key factors.
Thickness and reinforcement. A 2 to 3 inch patio slab with no rebar can usually be broken quickly and by hand, while a 6 inch driveway with heavy rebar takes more machine time and torch or saw work to cut the steel. If we run into double layers of mesh or unexpected beams, that affects labor.
Access and hauling distance. Backyard patios behind narrow gates or steep yards take extra time because broken concrete must be moved in smaller loads. If trucks cannot get close, we factor in more trips with wheelbarrows or small loaders. For rural properties around Conway, the distance to the disposal or recycling facility also matters.
Size and layout of the slab. Long, uninterrupted driveways are faster to break than many small, chopped up sections around landscaping. Curved edges, steps, and thickened edges near carports or garages can be slower to remove.
Site conditions. Tree roots, existing drainage lines, sprinkler systems, and soft soil all require extra care. If the area is sloped toward your home, we might recommend minor grading after removal so you do not end up with standing water. If you need same day removal of a collapsed section for safety reasons, that urgency can influence scheduling and cost.
Disposal requirements. If the concrete is clean, meaning it does not contain a lot of dirt, trash, or non-concrete debris, disposal is easier and generally cheaper. If we must sort through mixed construction waste, that time and disposal fee go into the quote.
We are happy to walk you through every line of the estimate so you understand where your money is going and what options you have to adjust scope to fit your budget.
In Conway, most typical residential concrete demolition projects such as tearing out a driveway, sidewalk, or back patio do not require a stand alone demolition permit when there is no structural component. However, there are important exceptions.
If the concrete is part of a structural element, for example a garage slab tied directly into foundation walls, porch piers, or support columns, the city may require review as part of a building permit, especially if you are replacing it or altering the structure. For commercial sites and multifamily properties, demolition can trigger additional rules related to accessibility and parking, so we recommend checking with the City of Conway Planning and Development office. Primetime Concrete Conway can help you understand when a simple removal is fine and when it needs to be part of a permitted project.
Many Conway neighborhoods have active HOAs that care about driveway appearance, parking pads, and front walkways. Before we start, it is a good idea to review your HOA guidelines or send them a quick note if you plan major changes to visible concrete. Some HOAs want to approve new layouts or finishes but usually do not object to removing a cracked or unsafe slab. If you want us to, we can provide basic sketches or descriptions for your HOA request.
Noise and timing also matter. Concrete demolition involves hammering and hauling, so we typically schedule residential work during normal daytime hours to keep peace with neighbors. We can phase larger removals over multiple days if you need to maintain partial access to your driveway or entry.
If you plan to replace the concrete, it often makes sense to let the demolition crew know upfront. That way we can remove only what needs to go, protect sections you want to keep, and shape the subgrade to match your planned thickness and slopes. Coordinating removal and replacement through a single company can save time and reduce surprises later.
Concrete demolition is not just about breaking things. Done poorly, it can crack your foundation, damage your siding, or leave you with low spots that collect water. Done well, it clears the way for a better driveway, patio, or project. Primetime Concrete Conway focuses on safe, efficient removal that protects the rest of your property.
We are used to working around real life conditions in Conway homes, kids playing in the yard, pets that need to go in and out, and tight driveways on busy streets. We set up clear work zones, talk through where we will park and stage materials, and keep you updated if we discover any surprises under the slab.
Because we also install new concrete, we look at demolition with an installer’s eye. If the old slab failed because of poor base, tree roots, or bad drainage, we will point that out and suggest fixes before any new concrete is placed. That extra attention is what keeps the same cracks from coming back a few years later.
Whether you are a homeowner tearing out a 20 year old driveway off Dave Ward Drive, a small business owner replacing a broken ADA ramp, or a contractor who needs a reliable demo crew before a larger project, we can tailor our equipment and crew size to match the job. We carry liability coverage, train our crews on safe equipment use, and respect your property as if it were our own.
If you are looking at broken or sunken concrete and wondering where to start, a quick on site visit from Primetime Concrete Conway will give you a clear plan, an honest price, and a timeline you can count on.
Professional concrete demolition & removal, done right the first time, quality materials, honest pricing, and results that last.Primetime Concrete Conway